Perancangan Sistem Validasi Label Kemasan dengan Metode System Development Life Cycle (SDLC)
Abstrak
The research conducted at PT X focuses on designing a label validation system to address customer complaints arising from discrepancies in labeling. The analytical approach employed is descriptive quantitative, utilizing the Measurement system Analysis (MSA) method. To assess the system’s effectiveness, the P control chart is used as a reliability test tool. The design of the label validation system follows the System Development Life Cycle (SDLC) methodology, specifically employing the Waterfall approach. The research outcomes demonstrate that implementing the label validation system within the company effectively reduces customer complaints. Furthermore, the system successfully minimizes discrepancies between the labels on finished goods boxes and those on attached components, eventually reaching a point of zero discrepancies.
Referensi
E. Setiawan, Implementasi Sistem Monitoring Jaringan Dan Validasi Pada Kantor Bupati Luwu. 2020.
M. F. Auliya, “Penerapan sistem informasi manajemen akademik di SMP Nurul Islami Semarang,” 2019.
I. Rudiatmadja, “Rancang Bangun Dan Monitoring Charger Baterai Dengan Metode Charging Otomatis Menggunakan Rangkaian Sensor Tegangan Dan Regulator Arus Berbasis Arduino Mega 2560,” Undip, vol. 4, no. 1, pp. 1–23, 2018.
B. T. Devara, W. D. Aryawan, and A. Nasirudin, “Desain Kapal Pembangkit Listrik Menggunakan Tenaga Gelombang Air Laut Untuk Daerah Papua,” J. Tek. ITS, vol. 6, no. 2, pp. 1–7, Mar. 2018, doi: 10.12962/j23373539.v6i2.26327.
I. M. W. S. Kurniawan, G. R. Dantes, and G. Indrawan, “ANALISIS KESUKSESAN IMPLEMENTASI APLIKASI ONLINE SINGLE SUBMISSION MENGGUNAKAN METODE DELONE DAN MCLEAN,” J. Nas. Pendidik. Tek. Inform., vol. 9, no. 3, p. 326, Dec. 2020, doi: 10.23887/janapati.v9i3.25087.
E. V. Waruwu, A. A, F. Sonata, and I. Zulkarnain, “PENERAPAN DIGITAL SIGNATURE MENGGUNAKAN METODE RSA UNTUK MENVALIDASI KEASLIAN IJAZAH SMA SWASTA BINA ARTHA,” J-SISKO TECH (Jurnal Teknol. Sist. Inf. dan Sist. Komput. TGD), vol. 3, no. 2, p. 45, Jul. 2020, doi: 10.53513/jsk.v3i2.2033.
M. L. Irrubai, “Strategi Labeling, Packaging dan Marketing Produk Hasil Industri Rumah Tangga,” SOSIO-DIDAKTIKA Soc. Sci. Educ. J., vol. 3, no. 1, pp. 15–30, 2016, doi: 10.15408/sd.v3i1.3794.
R. Aitken, L. Watkins, J. Williams, and A. Kean, “The positive role of labelling on consumers’ perceived behavioural control and intention to purchase organic food,” J. Clean. Prod., vol. 255, p. 120334, 2020, doi: 10.1016/j.jclepro.2020.120334.
S. Yao and K. Zhu, “Combating product label misconduct: The role of traceability and market inspection,” Eur. J. Oper. Res., vol. 282, no. 2, pp. 559–568, 2020, doi: 10.1016/j.ejor.2019.09.031.
S. Masengi, Y. H. Sipahutar, and A. C. Sitorus, “PENERAPAN SISTEM KETERTELUSURAN (TRACEABILITY) PADA PRODUK UDANG VANNAMEI BREADED BEKU (FROZEN BREADED SHRIMP) DI PT. RED RIBBON JAKARTA,” J. Kelaut. DAN Perikan. Terap., vol. 1, no. 1, p. 46, Nov. 2018, doi: 10.15578/jkpt.v1i1.7252.
D. O. Sihombing, “Perancangan Sistem Informasi Pengelolaan Kegiatan Himpunan Mahasiswa Menggunakan System Development Life Cycle,” TECHBUS (Technology, Bus. Entrep., vol. 1, no. 1, pp. 30–41, Jun. 2023, doi: 10.61245/techbus.v1i1.5.
A. A. Sofyan et al., “SOA System Development Life Cycle,” Achiev. Serv. Archit., vol. 6, no. 2, pp. 175–212, 2015, doi: 10.1002/9781119200178.ch9.
Kamesh and N. Sakthi Priya, “The practice of secure software development in SDLC: an investigation through existing model and a case study,” Secur. Commun. Networks, vol. 5, no. June, pp. 422–437, 2016, doi: 10.1002/sec.
A. K. Budiono, “Evaluasi Kemampuan Inspeksi Pekerja dan Penurunan Produk Cacat di Area Injection Molding PT . X,” vol. 5, no. 2, pp. 263–270, 2017.
H. Huda and N. Islahudin, “MEASURMENT SYSTEM ANALYSIS PADA OPERATOR PENGECEKAN VISUAL MENGGUNAKAN METODE ATTRIBUTE AGREEMENT SYSTEM DI INDUSTRI MANUFAKTUR,” JISI J. Integr. Sist. Ind., vol. 8, no. 2, p. 35, Sep. 2021, doi: 10.24853/jisi.8.2.35-40.
S. Budiantono, S. M. Retnaningsih, and D. F. Aksioma, “Measurement System Analysis Repeatability dan Reproducibility (Gauge R&R) pada Alat Vickers Hardness Tester Di PT Jaykay Files Indonesia,” J. Sains dan Seni, vol. 5, no. 2, pp. 468–473, 2016.
P. M. Abdullah, Living in the world that is fit for habitation : CCI’s ecumenical and religious relationships. 2015.
S. Campbell et al., “Purposive sampling: complex or simple? Research case examples,” J. Res. Nurs., vol. 25, no. 8, pp. 652–661, 2020, doi: 10.1177/1744987120927206.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2024 Mulyadi
Artikel ini berlisensiCreative Commons Attribution-ShareAlike 4.0 International License.
